Install the new cam follower gaskets to the block as follows:

• Obtain gaskets with the same thickness as the gaskets removed.
• Install the gaskets over the dowel pins in the block.

Lubricate the camshaft prior to installing the cam followers.

NOTE: The Print-o-Seal gasket must be against the cylinder block with the sealing bead toward the cam follower housing.

Install the cam follower assembly as follows:

• Install the capscrews and the studs in the same position from which they were removed.

• Tighten the capscrews in the alternating sequence, as illustrated, to the following torque values: