CAUTION  Mechanical overtightening can distort the threads or damage the filter element seal.

Fill the filter with clean 15W-40 oil.

Install the filter onto the oil filter head. Tighten the filter until the gasket contacts the filter head surface.

Use oil filter wrench, Part Number 3375049, to tighten the filter an additional three-fourths to one (¾ to 1) turn, or follow the instructions supplied with the filter.

Confirm that the oil level in the pan is to the full mark.

Operate the engine until the water temperature reaches 82°C [180°F]. Check the oil pressure and check for leaks.