Install the oil drain plug and tighten.

Add the specified amount of 36 liters [9.5 gal] of clean 15W-40 oil to fill the oil pan.

Check the oil level on the dipstick. It must be filled to the "H" (high) mark. Use the following procedure for dipstick calibration. Refer to Procedure 007-009 in Section 7.

Operate the engine until the water temperature reaches 82°C [180°F], and check for leaks.

Shut the engine OFF. Wait 5 to 7 minutes for the oil to drain back to the oil pan.

Check the oil level. Add oil as necessary to bring the level up to the "H" (high) mark on the dipstick.