Install the bracket to the viscosity sensor. Install the two bracket capscrews and tighten.

Connect the flexible hoses to the viscosity sensor fittings.

Do not allow dirt or debris to enter the oil lines.

1. Main oil rifle pressure
2. Modified pressure signal to pressure regulator
3. Return to oil pan.

Install the entire assembly with flex hoses attached to the cylinder block pan rail.

Install the two capscrews and tighten.

Connect the sensor drain line (1) to the tee fitting on the cylinder block.

Connect the pressure signal line (1) to the lubricating pump fitting (2) and the rifle pressure supply line (3) to the oil rifle fitting (4).