The valve is in the "OFF" position when the valve is in the horizontal position.

Close the manual shutoff valve.

Remove the coolant filter. Refer to Procedure 008-006 in Section 8.

Remove the coolant filter head insert.

Install the insert into the oil cooler housing.

Tighten the insert.

Install the coolant filter.

Turn the manual shutoff valve to the "ON" position.

The valve is in the "ON" position when the valve is in the vertical position.

Fill the engine with coolant. Refer to Procedure 008-018 in Section 8.

Start the engine and check for leaks.