Remove the intake and the exhaust pipes from the turbocharger.

Inspect the turbocharger compressor impeller blades for damage.

Rebuild or replace the turbocharger if damage is found. Refer to Procedure 010-033 in Section 10.

If the compressor impeller is damaged, inspect the intake air piping and the filter element for damage.

NOTE: Repair any damage before operating the engine.

Inspect the turbine wheel for damage.

Rebuild or replace the turbocharger if damage is found. Refer to Procedure 010-033 in Section 10.

Install the intake and exhaust pipes to the turbocharger and tighten the clamps.

Operate the engine and check for air leaks.