Use digital multimeter, Part Number 3377161, with the switch set to indicate D.C. volts.

Connect the multimeter positive lead to the starter solenoid positive cable terminal and the negative lead to a chassis or engine ground location.

The multimeter must show a voltage with the starter switch off to be normal.

If the multimeter does not indicate a voltage, check the cable connecting the starter solenoid and battery for breaks and for loose or corroded connections.

If the multimeter indicates a voltage, but the starter will not operate, check the wire connecting the starter solenoid to the starter switch for breaks and for loose or corroded connections.

If the wire connecting the starter solenoid and starter switch is not loose or damaged, and the starter will not operate, remove the cable connecting the starter and starter solenoid from the solenoid terminal.

Connect the multimeter positive lead to the solenoid positive terminal and the negative lead to the chassis or an engine ground location.

Turn the starter switch to the "START" position.

If the multimeter indicates a voltage, the starter solenoid is malfunctioning and must be replaced.

If the multimeter does not indicate a voltage, check the wire connecting the starter solenoid to the magnetic switch for breaks and for loose or corroded connections.

If the wire connecting the starter solenoid to the magnetic switch is not loose or damaged and the starter will not operate check the cable connecting the starter solenoid to the starting motor for breaks and for loose or corroded connections.

Check the cable connecting the starting motor to the battery for breaks and loose or corroded connections.

If the cables are not loose or damaged, the starting motor is malfunctioning and must be replaced.