Install two 1/2 - 13 x 1 1/2 puller capscrews which have a minimum of 1 1/4-inch threaded area at points (1) and (2).

Remove capscrews (3) and (4), and install two 5/8 - 18 x 6-inch guide studs, Part Number 3824462.

Determine the capscrew thread size, and install two "T-handles", Part Number 3824463, into the flywheel at points (4) and (5).

Remove the remaining four flywheel mounting capscrews.

NOTE: For Rail Applications the flywheel mounting capscrews must be discarded and replaced.

WARNING  This component or assembly weighs greater than 23 kg [50 lb]. To prevent serious personal injury, be sure to have assistance or use appropriate lifting equipment to lift this component or assembly.

Tighten capscrews (1) and (2) in alternating sequence to loosen the flywheel.