Install the sensor harness to the engine.

Install the sensor harness AMP connector to the ECM.

Tighten the connector capscrews to the ECM.

Install the sensor wiring harness retaining clamps to the support bracket and the engine block.

Install the mounting hardware and connect the following sensors to the sensor harness:

• Oil pressure sensor
• Oil temperature sensor
• Ambient air pressure
• Fuel shutoff control wire
• Engine position sensor
• Engine coolant temperature sensor.

On engines equipped with engine brakes, connect the engine brake harness to the sensor harness.

Wire tie the harness to the fuel tubing at the rear of the engine.